多模态控制在步进电机位置伺服系统中的应用研究
DOI:
CSTR:
作者:
作者单位:

南京理工大学 机械工程学院,南京理工大学 机械工程学院,南京理工大学 机械工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Application and Research of Multi-modal Control in Stepper Motor Position Servo System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对步进电机伺服系统的响应速度慢、稳态误差低的问题,提出了一种多模态控制策略。根据误差大小调节两种控制策略对被控对象的作用权值,使最终的控制量连续输出,实现控制策略无扰动、平滑的切换。半实物仿真实验结果表明,该控制策略较好地综合了模糊控制和模糊PID控制的优势,系统反应速度快,震荡小,抗干扰能力强,同时一定程度上改善了低频振荡和高频失步的问题,具有实际应用价值。

    Abstract:

    For the problem of slow response and low steady state error of the servo system of stepping motor, a multi-modal control strategy is proposed. According to the error, adjust the function weight of the two control strategies for the controlled object, to make the final control continuous, and the switching undisturbed and smooth of control policy. The semi-physics simulation results show that the control strategy combines the advantages of fuzzy control and fuzzy PID control and the system has fast response, small shock, strong anti-interference ability, at the same time, the problem of low frequency oscillation and high frequency out of step is improved to a certain extent, so it has practical application value.

    参考文献
    相似文献
    引证文献
引用本文

陈梦,高强,蔡洪宝.多模态控制在步进电机位置伺服系统中的应用研究计算机测量与控制[J].,2016,24(11).

复制
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-06-15
  • 最后修改日期:2016-06-15
  • 录用日期:2016-07-14
  • 在线发布日期: 2016-11-30
  • 出版日期:
文章二维码